Specificaties
Alle specificaties van de Axis A9188 Network I/O Relay Module
Belangrijkste specificaties
| Artikelnummer | 0820-001 |
|---|---|
| EAN | 7331021049895 |
| MSRP (verkoop advies prijs) | € 599,00 |
| Voeding | Power in: 8–28 V DC or Power over Ethernet IEEE 802.3af Type 1 Class 3 or IEEE 802.3at Type 2 Class 4 Power out: 12 V DC and 24 V DC. Max power out shared between 12 V and 24 V outputs: PoE Class 3: 3.6 W PoE Class 4/DC input: 12 W |
| Maximum stroomverbruik (Watt) | 26 |
| Afmetingen (cm) | 4.3 x 18.6 x 12 |
| Garantie | 3 years |
I/o Interface
| Aantal digitale I/O | 8 |
|---|---|
| Digitale I/O | 8x I/O, configurable as input, supervised input with analog read-out or output (Digital input: 0 to max 40 V DC, possible to supervise between 0-12 V (4 states), Digital output: 0 to max 40 V DC, Open drain, max 100 mA) |
| Relais | 8x Form C relays, NO/NC contacts, max 1 A, 48 V DC |
Netwerk
| Beveiliging | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, Digest authentication |
|---|---|
| Ondersteunde protocollen (comptabiliteit) | IPv4, IPv6, HTTP, HTTPS, TLSa, QoS layer 3 DiffServ, FTP, SFTP, SMTP, Bonjour, UPnPTM, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
Software
| Applicatie programma interface (API) | Open API for software integration, including VAPIX®. AXIS Video Hosting System (AVHS) with One-Click Connection Support for AXIS Camera Application Platform enabling installation of third-party applications |
|---|
Events & Alarms
| Sabotagedetectie | Dedicated tamper input for external tamper contact(s) |
|---|---|
| Gebeurtenis geschiedenis | 30.000 (FIFO) |
| Acties voor evenementen | Notification via email, HTTP, HTTPS and TCP, External output port Status LED |
| Detectie | Tamper detection, Network lost, Configuration, Event logger, Hardware, Input signal, Schedule, System, Time, Supervised inputs (4 states), Relays and outputs, Heartbeat Lost |
Algemeen
| Intern werkgeheugen | 256 MB RAM, 256 MB Flash |
|---|---|
| Voeding | Power in: 8–28 V DC or Power over Ethernet IEEE 802.3af Type 1 Class 3 or IEEE 802.3at Type 2 Class 4 Power out: 12 V DC and 24 V DC. Max power out shared between 12 V and 24 V outputs: PoE Class 3: 3.6 W PoE Class 4/DC input: 12 W |
| Maximum stroomverbruik (Watt) | 26 |
| Aansluitingen | 1x RJ45 10BASE-T/100BASE-TX Terminal blocks: 1x DC IN, 2x DC out, 8x Inputs/Outputs, 8x Relays, 1x Tamper, 1x RS485 (for future use), Cable size for connectors: CSA: AWG 28–16, CUL/UL: AWG 30–14 |
| Gebruikscondities (°C) | -30° to 55° |
| Gebruikscondities luchtvochtigheid | 20–85% RH (non-condensing) |
| Goedkeuringen | EN 55022 Class B, EN 50130-4, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class B, ICES-003 Class B, C-tick AS/NZS CISPR22 Class B, VCCI Class B, IEC/EN 60950-1, UL 2043, EN 50581 |
| Afmetingen (cm) | 4.3 x 18.6 x 12 |
| Gewicht (kg) | 0.5000 |
| Bijgevoegde accessoires | Connector kit, jumper kit, Torx L-key, Installation Guide |
| Garantie | 3 years |
Beschrijving
AXIS A9188 Network I/O Relay Module is an intelligent module with 8 configurable I/Os and 8 form C relays and supports supervised inputs. Open API, including VAPIX, for software integration. High level of integration with AXIS A1001 Network Door Controller for elevator control for floor management etc. Supported by AXIS Video Hosting System, AXIS Camera Station and third party partner software. The module provides 12 and 24 V DC output to I/O devices and can extend the functionality of any Axis product where you need additional I/Os or relays. Powered by PoE+ or 12 and 24 V DC input